iPECS LIP-9010 - 6. SEND & RETRIEVE MESSAGES; 6.1 RESPONDING TO A STATION MESSAGE WAITING INDICATION

LIP-9000 Series User Guide - ST 45
6. Send & Retrieve Messages
6.1 Responding to a Station Message Waiting
Indication
Another station can leave a Station Message Waiting indication (MWI)
when you do not answer or your phone is in DND mode. The message icon
will be displayed on the LCD screen. If programmed, a flashing MSG LED
on the iPECS Phone also will indicate when there is a Message Waiting. As
a further notification, a Message Wait Reminder Tone can be provided.
You may review and delete messages as well as respond with a call back.
To review your Station messages:
 Press the MSG button, the LCD shows the Message Summary display:
1. ICM MWI(002)
2. CLI MSG(000)
3. VSF MSG(002)
4. VMS MSG(001)
5. UMS MSG(003)
6. SMS(00)
BACK OK
 Dial 1 to view Station messages,
 Press the navigation up/down button to scroll through the messages.
To return a call from the list of Intercom (MWI):
 Press the navigation up/down buttons to scroll through the Intercom
messages,
 Press the OK Soft button or OK button to select and place the return
call.