LIP-9000 Series User Guide - ST 55
If the desired Page Zone is busy, the User can elect to be recalled when
their turn comes in the queue. Users can also request a paged party
answer the Page using Meet-Me Paging. In this case, the paged party may
answer the page from any phone in the system by dialing the Meet-Me
code.
To make a page:
Lift the handset,
Dial the desired Page zone,
If assigned, after page warning tone, make announcement.
To queue for a page when busy is received:
Press the MSG button,
Replace the handset returning to idle.
To answer a Meet-me-Page:
Lift the handset.
Dial 544 (Meet-Me-Page code).
8.5 Push-To-Talk (PTT) Page
iPECS Phones can be assigned as a member of one or more of the
system’s nine Push-To-Talk (PTT) page groups. Users separately log-in or
log-out of any one or all PTT groups to which the phone is assigned. Once
logged in, place or receive one-way page announcements to/from other
users who are logged in to the same PTT group.
To log-in to a PTT group:
Dial #0
Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
Dial #0, the PTT Log-in/out code,
Press the * key.
To place a page announcement to the active PTT group:
Press and hold the PTT Flex button,
After confirmation tone, make page announcement.
To Next Page
Loading...
