LIP-9000 Series User Guide - ST 59
9. Features & Flex Buttons
9.1 Entering Station Program Data
A special code set is available for iPECS Phone users to assign certain
attributes such as Authorization Codes (Passwords). After entering the
User Program mode, dial the codes to select the attribute and setting.
Once selected, the setting is saved. A list of the User Program codes, the
feature/function and any input required are given in iPECS-UCP Manual.
In some cases, you enter these codes as part of Flex button assignments.
To assign user programmable attributes to your station:
Press the TRANSFER(PGM),
Dial desired User Program codes,
Press the HOLD(SAVE).
9.2 Assigning Features to Flex Buttons
You may assign features and functions to the Flex buttons on your iPECS
Phone (possibly CO/IP lines).
Flex buttons may be assigned for most features providing One-Touch
feature activation (ex., a Flex button may be assigned to access the
Account Code feature and may include the Account code digits).
Features that may be assigned to a Flex button include:
DSS/BLF—Enter station number.
Speed Dial—Enter Station/System Speed dial bin.
Flex Numbering Plan—Enter Flex Numbering Plan code (refer to iPECS-
UCP Manual).
User Program Code—Press the TRANSFER(PGM) and enter a User
Program code (refer to iPECS-UCP Manual).
CO/IP Line—Enter the CO/IP line or group number.
To Next Page
Loading...
