iPECS LIP-9010 - Page 46

38 LIP-9000 Series User Guide - ST
When entering a Speed Dial, a 16-character name may be associated with
the number for Dial by Name. (Refer to the 2.2.1Phone Setting
To place a call using Station Speed Dial:
-Station
Name Program about the way to enter the Speed Name.)
 Press the SPEED button.
 Dial the desired Station Speed Dial bin number (000-099).
Or
 Press the DIR button.
 Choose 1 for Private Directory.
 Select from the list, or Dial by Name.
To enter a Station Speed Dial number with CO Line and Name:
 Press the SPEED button.
 Dial the desired Station Speed Dial number,
 Select/dial the CO/IP line/group
 Dial the desired number to be stored,
 Press the HOLD(SAVE),
 Enter the associated name if desired.
 Press the HOLD(SAVE).
To assign a Station Speed Dial number directly to a Flex
button(9020/9030/9040 Only):
 Press the TRANSFER(PGM),
 Press the desired Flex button,
 Select the TEL NUM Soft button,
 Select/dial the CO/IP line/group,
 Dial the desired number,
 Press the HOLD(SAVE),
 Enter the associated name if desired,
 Press the HOLD(SAVE).