- 33 -
NOTE You have to sign up for DDNS service with the service provider
before configuring this feature.
UPnP: The camera supports UPnP (Universal Plug and
Play), which is a set of computer network protocols that
enable the device-to-device interoperability. In addition, it
supports port auto mapping function so that you can access
the camera if it is behind an NAT router or firewall. Select the
Enable option to enable this feature.
Ports Number
- HTTP Port: The default HTTP port is 80.
NOTE If the camera is behind an NAT router of firewall, the suggested
to be used is from 1024 to 65535.
4.4.2 Network >> Network >> Advanced
Bonjour: The devices with Bonjour will automatically
broadcast their own services and listen for services being
offered for the use of others. If your browser with Bonjour,
you can find the camera on your local network without
knowing its IP address.
The Apple Safari is already with Bonjour. You can download
the complete Bonjour for Internet Explorer browser from
Apple's web site by visiting http://www.apple.com/bonjour/
.
RTSP
- RTSP Streaming: Selection the Authentication as
Disable, Basic, or Digest to configure the transmission of
streaming data within the network.
- RTSP Port: The default RTSP Port (Real Time Streaming
Protocol) is 554.
To Next Page
Loading...
Need help?
General
