iRay Technology Pluto0001X - Component of the Imaging System

13
Digital Intra-oral X-Ray Imaging System Pluto0001X /Pluto0002X User's Manual
including illustrations, is based on the device prototype. If the
device does not contain these contents, they will not apply to this
device.
2.2 Component of the imaging system
The component of digital intraoral X-ray imaging system are
sensor and image acquisition software iRayDR.
2.2.1 Image acquisition workstation
The image acquisition software iRayDR is used to acquire
and display the image, patient management, examination
management, image storage and image printing administration.
Note: the detail description of the image acquisition
workstation are showed in the user manual of the iRayDR.
2.2.2 Sensor
The pluto0001X and Pluto0002X feature a 20 µm pixel pitch
CMOS sensor with directly deposited CsI:Tl scintillator which
ensures optimal resolution. Made from a strong sealed Kevlar
shell, the sensor has an ergonomic design with smooth edges,
rounded corners, and a flexible cable for maximum patient
comfort. An easy to use hi-speed direct USB interface enables a
simple connection to a PC without need for an additional control
box. The optional iRay intra-oral software application makes it
easy
to acquire, enhance, analyze, view and share images from
the Pluto 0001X/Pluto0002X sensor.
Fig.1 Pluto0001X outline(unit: mm)