iRay Technology Pluto0001X - 3.5 Create Correction Templates

20
Digital Intra-oral X-Ray Imaging System Pluto0001X /Pluto0002X User's Manual
Parameters Description Note
Product No Product number Read only
Serial No Sensor serial number Read only
Main Version
The Firmware version
number
Read only
Read Version Read only
Set Delay Time(ms) Delay time
Set before exposure and
only work in AC mode
Trigger Mode Trigger Mode
Three trigger mode:
AED_DC, AED_AC and
software.
Trigger Threshold(uGy/s) Trigger threshold
Trigger threshold with
3.5 Create correction templates:
The creation steps of gain and defect are as follows:
1. Double-click iDetector.exe to open image acquisition
software, select detector from the list, select “Pluto0001X” and
click “Connect”, wait for successful connection.
Select calibrate tab to enter template generation page.