32
Digital Intra-oral X-Ray Imaging System Pluto0001X /Pluto0002X User's Manual
Resolution Monthly/Yearly Check the resolution of the detector
through the resolution graph or use a
phantom
Linearity range Monthly/Yearly Evaluate by checking the image gray
value
correction Monthly/Yearly
collimator or exposure environment
changes
6.3 Repair
If a problem cannot be solved, contact your sales
representative or local dealer. Please provide the following
information:
Product Name:
Series Number:
Description of Problem: as clearly as possible
6.4 Care and Cleaning
In order to prevent infection, wipe the front plate of the sensor
the instrument. If you plan to use a disinfectant other than those
specified above, or you are mixing another disinfectant with
ethanol, please consult a specialist because it may damage the
plate.
To clean the sensor shall use the 70% isopropyl alcohol.
Please observe the precautions noted.
Do not soak or immerse any part of the Product, and be sure
to dry it completely after cleaning.
Clean the surface of the Product by moistening it with a soft
cotton swab dipped in one of the cleaning solution. Gently wipe
the surface end-to-end in straight lines, without applying any
pressure. Make sure the liquid does not penetrate the Product
through the USB cable or the sensor cable connectors.
After cleaning the surface of the sensor, use a clean lint-free
cloth to dry the Product, as required, until the surface is clean.
To Next Page
Loading...