31
Digital Intra-oral X-Ray Imaging System Pluto0001X /Pluto0002X User's Manual
PFOS legislation (No.757/2010)
REACH legislation (No.1907/2006)
Cadmium legislation (Controlled substance: Annex XVII)
REACH legislation (No.1907/2006) (SVHC: Annex XVII)
EU Packaging Directive (94/62/EC)
6.Product Maintenance
6.1 Expected Service Life
Estimated product lifetime is 5 years with regular inspection
and maintenance.
6.2 Regular Inspection and Maintenance
The detector needs regular inspection at least once a year not
only for the safety of patients, the operator and third parties, but
also for performance and reliability. If necessary, contact service
In order to ensure the safety of patients, operators or other
third parties, and to maintain the good performance and
reliability of the equipment, it is necessary to conduct regular
inspections at least once a year. If necessary, clean up equipment,
requirements in the preface of this manual.
6.2.1 Daily inspection
Before and after using, the following check items shall be
implement.
Inspection items Inspection actions
Intraoral sensor Make sure that the detector has no cracks
Ensure that no dust and impurities adhere to the USB
interface
cable Ensure that the cables are not damaged and the cable
casing is not torn
6.2.2 Monthly and annual inspections
Inspection items frequency Inspection actions
To Next Page
Loading...