9
Getting Started
Initial Setup
The Setup Wizard built into your phone will help guide you through
this process.
NOTE: Your setup may be different than the instructions in this User
Manual because of software updates or if you choose different
options. If the steps are different, just follow your smartphone's
on-screen instructions for setup.
Activate the eSIM (electronic SIM)
Your IRIS Connect comes with an eSIM and no physical SIM is
needed to activate your service. To activate your eSIM, turn on your
phone and follow these steps:
1. Select your language and select the keyboard.
2. Select your Wi-Fi network from the list.
3. Download the eSIM.
4. If Download eSIM fails. If you are prompted to scan a QR code, find
it in your Consumer Cellular packing slip or email if purchased at a
retailer.
To Next Page
Loading...
