7 For more information, visit global.irobot.com
EN
1
3
2
Turn the cyclone separator to unlock and
remove it from the dust bin.
Press the bin empty button to access
the cyclone separator.
Use cold water
when cleaning the
cyclone separator.
Insert the cyclone
separator back into
the vacuum after it
is completely dry.
Remove the exhaust filter by pressing
down on the buttons on both ends
and pulling out.
1
2
3
Cleaning the Exhaust FilterCleaning the Cyclone Separator
Wash the filter under cold water.
Reinsert the filter back into the vacuum
once it is completely dry.
To Next Page
Loading...
Need help?
General
