3 For more information, visit global.irobot.com
EN
• Your vacuum can be operated without the need to continuously hold
down the trigger. To enable continuous cleaning, press the continuous
cleaning switch until it clicks into place.
• To disable continuous cleaning, push the switch in the opposite direction
until it clicks into place.
Note: After each use, please ensure that the continuous cleaning switch is
disabled. Failure to do so may cause battery failure.
Your vacuum has two power modes -
High Power & Low Power. The vacuum
will begin in High Power. To select
Low Power press the power selector.
Pressing the power selector a second
time will return the vacuum to High
Power.
To start cleaning, hold down on
the trigger to start the vacuum.
Cleaning
Continuous Cleaning
Power Selector
To Next Page
Loading...
Need help?
General
