iRobot Looj User Manual

12 iRobot Looj Owner’s Manual
Attaching the Looj Belt Clip
The Looj belt clip is designed to hold Looj while you climb up and down the
ladder. Always use the belt clip or the optional holster accessory (see below)
when using Looj on a ladder.
Hook the belt clip over belt where Looj will be secure and easy to reach.
Attach the robot to the robot clip.
CAUTION: Always keep the belt clip on the side of your body. Placing
the robot in the front may cause it to be kicked by your leg and fall off.
CAUTION: Never use Looj on a ladder without the belt clip or the
holster to hold the robot while you climb or descend.
Looj Holster Accessory (optional, not included in all models)
UsetheLoojHolsterAccessoryasastoragedeviceandtokeepyour
clothing clean while carrying Looj. The holster includes a belt and a pouch to
hold the fully assembled Looj and remote control handle. There is also a loop
on the back for hanging.
• PlaceLoojintheholsterwiththeaugerfacingup.
Robot Hook
Belt Clip

iRobot Looj Specifications

General

Brand	iRobot
Model	Looj
Category	Vacuum Cleaner
Language	English