iRobot Looj User Manual

www.irobot.com 13
UsingiRobot
®
Looj
™
Always test Looj before using it.
Prior to using Looj in a gutter, try driving forward and backward on the
ground. Try spinning the auger in both directions. Note the lights on the
remote control handle and on the robot blink during transmission.
Also,practiceattachinganddetachingthehandleasdescribedonpage10.
Using Looj
1. The optimum spot for ladder placement is away
from wires, hazards, on flat ground, etc. Read and follow
ladder instructions provided by the ladder manufacturer before
using a ladder. See “Important Safety Instructions” section for
more details.
2. Attach Looj to the belt clip or place Looj into holster.
3. Climbtheladder.
4. Remove debris from gutter at the
corner of the roof. Place Looj in gutter.
Remove debris from gutter directly in
front of ladder. If you do not, you may
be sprayed by debris when Looj begins
to operate.
5. Pressthepowerswitchontherobottoturniton.Thepower
light should be green to indicate that its battery is charged.
A red power light indicates that you should charge Looj’s battery.
CAUTION: Wear safety glasses when
using Looj to protect your eyes from debris.

iRobot Looj Specifications

General

Brand	iRobot
Model	Looj
Category	Vacuum Cleaner
Language	English