iRobot Scooba - Maintenance Procedures; Empty and Rinse Water Compartments

22 Scooba 400 Series Owner’s Manual
EN
3
4
Pour out any remaining liquid
from both the Clean and Dirty
compartments.
Fill both compartments with warm water
(maximum temperature 120°F / 50°C).
Regular maintenance will help Scooba run at peak performance. Be sure to rinse your
Scooba’s components after every cleaning cycle and perform other maintenance as
prompted by your Scooba.
Empty and Rinse Water Compartments
Scooba puts down fluid from the Clean compartment and collects dirty fluid into the
Dirty compartment.
Maintenance
1
2
Press the Tank Release button to
eject the tank.
Remove both the blue and gray
compartment caps.
MAX 120°F / 50°C