Page 14 of 14
BBC/BBCD080Installation Guide
©Copyright 2024 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
Document Number: BBC_BBCD080/300424
• Ensure all bolts are tensioned correctly
• Doing a pre-trip check before heading away, or every 10,000km (6,200 miles) is good
practice.
• Visually inspect bull bar and hardware, retention bull bar hardware or when needed.
• Check the operation of the blinkers, park lights, fog lights and winch if installed and
ensure that they are all functioning correctly.
• Ensure all electrical wiring is clear of sharp edges and correctly secured.
• If vehicles are fitted with parking sensors, radars and/or front cameras, check they are
operating correctly.
• Some makes and models may need to return to the dealership for recalibration.
• Stand back and admire your work.
Once Installed...
To Previous Page
