EasyManua.ls Logo

Irrimec ST4 - Adjustment

Irrimec ST4
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 04
- Warning: It is necessary before each adjustment to execute
the following: Slowly remove tension on the drive
belt to allow hose drum to ret against the anti-return pawl.
- Stay Away From Operating Sprinklers
- Stay away and keep others away from the sprinkler head during
operation. Pressurized fluid from a sprinkler can inflict serious injury
to by-standers.
Stay Away From Power Lines
- Avoid letting water contact power lines.
Be careful not to contact power lines with irrigation pipe or mechanical
equipment.
- Keep Hands and Clothing Away.
- Keep All Guards and Shields In Place.
- Do not under any circumstances reach into
the Hose-Reel while it is in operation.
Never Operate This Machine With Safety Guards Removed!
Never Service Or Make Adjustment While The Water-Reel Is Pressurized.
- Shut the Pump off at the source before attempting to do any service,
maintenance or adjustment.
Never Service Or Make Adjustment While The PET Tube Is in Tension.