SAFETY AT WORK
The Product hereafter described is manufactured and tested
according to the specifications, and when used for normal
applications and within the normal electrical and mechanical
limits will not cause hazard to health and safety, provided that
the standard engineering rules are observed and that it is used
by trained personnel only.
The application guide is published by the Seller to be used
together with the Product described in the corresponding
document. The Seller reserves the right to modify the guide
without warning, for any reason. This includes also but not
only, the adoption of more advanced technological solutions and
modified manufacturing procedures, and also the addition of other
features, not available in the first release.
The Seller declines any difficulties arising from unknown
technical problems. The Seller declines also any responsibility in
case of modification of the Product or of any intervention not
authorized by the Seller in writing.
The warranty includes the repair time and the materials necessary
to restore the complete efficiency of the Product; so, it does not
include other burdens, such as the transport and customs fee.
Under no circumstances the warrantee includes any cost that
the User may have suffered because of the Product unavailability
and downtime.
The Product is CE marked, and has been tested to operate
according to EN 61010-1, with the following operating conditions:
. Pollution degree 2: normally, non conductive pollution occurs;
. Measurement category 2, for measurement inputs;
. Altitude: less than 2000 m;
. Operating temperature: 0 to 50 °C; storage: -20 °C to 70 °C;
. Relative humidity : 10 - 80% without condensing;
. Inputs/outputs protection: IP 2X: CEI 70-1 for all but high
voltage outputs; IP4X for high voltage outputs;
. The test set is portable, using the handles.
To Next Page
Loading...
