23
While two batteries are the same type and same cells, complete charging setting. press
bothselect button to initiate task.
Both channels operate under same parameters and would be assigned 50/50 from total
power.
Tjnvubofpvtmz!dibshjoh!jo!cpui!diboofmt
single channels operation can reach 200w
both channels simultaneously initiate task would get 100w for each
both channels non-simultaneous initiate task, the channel which initiate later will get 150w, if
task needs less than150w, remaining power will go into the other channel automatically.
During dual Charging operation, current adjust in a channel will get that channel 150w priority,
if task needs less than 150w, remaining power will go into the other channel automatically.
Qpxfs!ejtusjcvujpo
Task Setting
To Next Page
Loading...
