Charge
Balancing port is strongly recommended when charging lipo battery, which
can make sure to monitor voltage on each cell battery and balance it when
charging. Warning beeper will yell before start charging lipo if in non-balance
mode(no connecting with balance port).
Current setting range: 0.1~20A
The battery type, cell count and charging current are auto set accordingly
when connecting with BattGo battery.
Discharge
Current setting range: 0.1~1.5A
The battery type, cell count and discharging current are auto set accordingly
when connecting with BattGo battery.
Storage
Current setting range: 0.1~20A
The battery type, cell count and storage current are auto set accordingly
when connecting with BattGo battery.
DC Power supply
The charger can be used as a DC power supply when choosing this function,
with adjustable voltage 2~30V, and current 0.5~10A.
The battery type, parameter and current are not optional in this task.
To Next Page
Loading...
