15
Warnings and Safety Tips
The following safety tips are essentially important. Please strictly follow the manual’s instruc-
tions in operation to guarantee safety. Improper operation or incorrect working parameter
settings may cause damages to the charger and battery and/or result to a re.
Do not use the charger in an unattended manner; in case of any functional abnormity, please
stop using it and refer to the manual.
Keep the charger away from dust, humidity, rain and high temperature, as well as avoid direct
exposure to the sun and intense vibration.
Make sure the heat emission hole at the bottom of the charger is uncovered while in use, and
ensure the cooling fan smoothly extracts heat.
Please fully understand the charging and discharging characteristics as well as the battery’s
specications. Additionally, set up proper charging parameters in the charger. Incorrect
setting of parameters can cause damage to the charger and battery and/or result to
disastrous consequences such as re or explosion.
Charger power input for the DC T6 / T6 Lite (8-32V), T8 (12-40V),make sure the polarities are
correct when connecting to the power supply.
Please place the charger on a heat-resisting, non-ammable and insulating surface. Do not
use it by placing it on the car’s seats, carpet or other similar places. Keep inammable and
explosive objects away from operation areas of the charger.
When charging or discharging is completed, please press the speed shuttle key to terminate
current task, and remove the battery when the charger shows the standby screen.
To Next Page
Loading...
