Please read this user manual in detail and follow the instructions carefully before
using your new charger：
1.Keep the charger away from humidity and heat source while charging, ensure
proper cooling during use.
2.Make sure the battery cells is correct before charging, avoid over-discharge of
the battery.
3.This charger can only use for 2~6S Lipo (voltage 7.4~26V) battery as power
supply. Do not use an input power supply beyond the range of voltage, avoid
damage the charger or even cause dangerous.
Attention
Operation button
Indicator light
XT60 power input port
USB output port
UC1 Smart Charger Instructions
To Next Page
Need help?
General
