Iseki TM3267 - SPECIFICATIONS; Mechanical Transmission Specifications

SPECIFICATIONS
97
MECHANICAL TRANSMISSION
MODEL TM3217F TM3247F TM3267F
ENGINE:
Make ISEKI
Model E3112-B36 E3112-B34 E3CD-B71
Type indirect injection, overhead valve
Aspiration Nature
Displacement 1 123 cc 1 498 cc
Number Of Cylinders 3
Bore 78.2 mm 87 mm
Stroke 78 mm 84 mm
Engine Horsepower (Net)
14.3 kW (19.2HP) @2 600 min-1
16.1 kW (21.6HP) @2 600 min-1 18.2 kW (24.4HP) @2 600 min-1
PTO Horsepower (Estimate) 12.2 kW (16.4HP) 13.7 kW (18.4HP) 15.9 kW (21.3HP)
Firing Order 1-3-2
Compression Ratio 22.5 to 1 21.7 to 1
Low Idle Speed 1 175-1 225 min-1 1 175-1 225 min-1 1 175-1 225 min-1
High Idle Speed 2 650-2 750 min-1 2 780-2 880 min-1 2 810-2 910 min-1
Valve Clearance (Clod) Intake 0.25 mm 0.35 mm
Exhaust 0.25 mm 0.35 mm
Air Cleaner Single dry element
Engine Cooling Liquid, forced circulation
Code Starting Aid Glow plugs (3)
TRANSMISSION:
Type Primary 4 - speed syncromesh
Range 2 speeds sliding mesh
Mechanical Shuttle Constant mesh, 89% reverse reduction
Gear Speeds 8 gears forward, 8 reverse
Clutch Dry single disk
Brakes Mechanically actuated sealed wet disk
POWER TAKE-OFF (PTO):
Control Lever
Rear PTO Shaft Clockwise rotation from the rear of the tractor
Output 35 mm diameter, 6 spline
Engine Speed @engine revolution speed 540@2 475 min-1
Mid PTO Shaft Clockwise rotation from the rear of the tractor
Output 25.4 mm diameter, 15 spline
Engine Speed @engine revolution speed - 2 000@2461 min-1 - 2 000@2461 min-1 - 2 000@2461 min-1
SPECIFICATIONS