Isel ICP 4030 User Manual

ICP 3020 / ICP 4030 iMC-P Operating instruction
page 6
2 Intended use and reasonably foreseeable misuse
Isel CNC machinery of type ICP are CNC controlled machinery with more than one linear
axis resp. one or two optional rotation axis. The motor power amplifiers will be driven via a
PC based stepper-motor-control. All control and power electronics for the axis is mounted in
a control cabinet.
Differences between CNC machine and CNC base machine:
isel-CNC-machine:
In the new, at 29.12.2009 legally binding machine directive 2006/42/EC, is the term
“machinery” defined as follows (quote from EC directive, article 2, letter a):
„machinery“
an assembly, fitted with or intended to be fitted with a drive system other than directly applied human or
animal effort, consisting of linked parts or components, at least one of which moves, and which are joined
together for a specific application.
Each isel-CNC-machine delivered with a tool (e.g. milling or engraving spindle, metering
device, measuring device like CCD camera or triangulation laser, water jet nozzle, plasma
burner), is for the purpose of the directive 2006/42/EC a machine, because she was
manufactured for a specific purpose resp. specific application and therewith a specific
usage.
The usage results from the kind of tool which is mounted on a moveable axis, e.g.:
tool = milling tool  usage for milling, drilling
tool = engraving tool  usage for engraving
tool = metering device  usage for metering
tool = water jet nozzle  usage for water jet cutting
The manufacturer isel Germany AG is able to effect a legal prescribed risk assessment for
the CNC-machines. CNC-machines will be delivered with a machinery enclosure.
isel-CNC-base-machine:
In the new, at 29.12.2009 legally binding machine directive 2006/42/EC is the term “partly
completed machinery” defined as follows (quote from EC directive, article 2, letter g):
„partly completed machinery”

An assembly which is almost machinery but which cannot in itself perform a specific
application. A drive system is partly completed machinery. Partly completed machinery
is only intended to be incorporated into or assembled with other machinery or other
partly completed machinery or equipment, thereby forming machinery to which this
Directive applies;
Each isel-CNC-base-machine delivered without a tool and therefore not for a specific
application is for the purpose of the directive 2006/42/EC a partly completed machine.
 The CNC-machine / CNC-base-machine is used for work in dry rooms (workshops,
laboratories) and industrial firms (max. ambient temperature: 40°C)

Isel ICP 4030 Specifications

General

Brand	Isel
Model	ICP 4030
Category	Control Systems
Language	English