iSMA CONTROLLI TP - Introduction; Revision History

TP Software User Manual
www.ismacontrolli.com
DMP253en | 1st Issue rev. 0 | 04/2022
page 4 of 49
1 Introduction
The TP Touch Point is a moderncomfort management wallpanel with two most popular
open communicationprotocols: ModbusRTU/ASCII and BACnetMS/TP.The Touch Point
is available in different configurations of sensors (temperature, CO
2
, and humidity), colors,
and versions with or without a display. The panel is equipped with an interactive TFT
touchscreen, touch buttons, and glass panel.
The panel can be configured using the iSMA Configurator software or Modbus registers/
BACnet objects. It fits most of standard junction boxes in Europe and can easily be
installed using a wall back box.
1.1 Revision History
Rev. Date Description
1.0 20 Apr 2022 First edition
Table 1. Revision history