iSMA CONTROLLI TP - Usb

TP Software User Manual
www.ismacontrolli.com
DMP253en | 1st Issue rev. 0 | 04/2022
page 9 of 49
•
•
•
BACnet object: DEVICE, property: 5103;
TRANSMITTED_FRAMES: shows the number of sent frames. The register's value is reset
at the start of the panel and at the change of transmission parameters;
Modbus register: 30008;
BACnet object: DEVICE, property: 5104.
3.2 USB
A USB bus is accessible through the USB C port at the bottom of the device. Device
identifies itself as a USB HID, and can be configured using the iSMA Configurator and FCU
Updater software.