Isolite E3MINI Series - CONTROL PANEL FEATURES AND ADJUSTMENTS; Switched Command and Output Operation; Dimming Adjustment (DIM ADJ) Operation

Switched Command Line Voltage signal CMD 1
(120-277 VAC)
instructs
its respective
output
OUT 1
ON / OFF
Switched Output Turns ON / OFF as instructed by its respective Switched Command CMD
1. Will
automatically energize in Inverter Mode regardless of the state of CMD 1.
TEST Pressing this TEST button in the Charge Mode will transfer DIM 1 signal to its pre
-set value determined by
DIM ADJ. TEST button does not function in Inverter Mode.
DIM ADJ. There are 5 preset dim levels in addition to full brightness. Adjust the DIM ADJ. clockwise (CW) for brighter Emergency Lights and counter
-clockwise (CCW)
for dimmer Emergency Lights.
26 | INSTALLATION / OPERATION MANUAL