iSpring Water Systems Page 15
System Start-Up
Make sure ALL the tubing is connected to the correct locations. Double-check
the security of all connections before TURNING ON the water supply. See the
following checklist.
A. ) The faucet tubing connects to the inline filter (5
th
stage). One end of
the inline filter is marked “connect to faucet.” (3/8” blue tubing)
B. ) The feed water tubing connects to the 1
st
stage of the unit.
C. ) The storage tank tubing connects to the other end of the inline filter (5
th
stage) at the union tee fitting. (3/8” white tubing)
D. ) The wastewater tubing from the drain saddle valve connects to the
flow restrictor.
To Next Page
Loading...
