istobal 4CA2000 - Wash Programs Overview; Credit Recovery After Power Cut

BUY-TIME MODE PAYMENT SYSTEM
RECOVERING CREDITS AFTER A POWER CUT
When a power cut occurs on the jet wash while a program is running, the credit available is stored on the control
board memory. When power is resumed, two things can happen:
1) The jet wash is still in service. In this case, the credits stored become available again and stay until they
are used up.
2) The jet wash is closed. In this case, the customer is given 1.5 minutes to consume the credits stored. If
the jet wash is not used during this time, the service is cancelled automatically and the jet wash closes.
WASH PROGRAMS
Pre-set programs for a jet wash facility with Buy-time mode payment systems:
PROGRAM FUNCTION PRESSURE PRODUCT WATER TYPE TEMPERAT.
DISTANCE
FROM VEHICLE
5 PROGRAMS
1
HOT SHAMPOO
WASH
Low Shampoo
Mains or
softened
40º C Approx. 5 cm
2
WASH WITH
COLD WATER &
SHAMPOO
High Shampoo Mains Cold Approx. 5 cm
3
HOT FOAM
WITH BRUSH
Low
Color Fusion
Active Foam
Mains or
softened
40º C --
4
RINSE High No chemical
Mains or
softened
Cold Approx. 30 cm
5
WAXING Low Wax
Mains or
softened
40º C Approx. 30 cm
6 PROGRAMS
1
RIM CLEANER Low Shampoo Mains 40º C Approx. 30 cm
2
HOT SHAMPOO
WASH
Low Shampoo
Mains or
softened
40º C Approx. 5 cm
3
WASH WITH
COLD WATER &
SHAMPOO
High Shampoo Mains Cold Approx. 5 cm
4
HOT FOAM
WITH BRUSH
Low
Color Fusion
Active Foam
Mains or
softened
40º C --
5
RINSE High No chemical
Mains or
softened
Cold Approx. 30 cm
6
WAXING Low Wax
Mains or
softened
40º C Approx. 30 cm
Programs can be modied with IWManager or on a KTP400 touch-screen.
16