OPERATION
FLUIDS
This screen allows the products to be fully monitored.
The system automatically reads the level of product in the
containers in accordance with the data stored on the jet
wash board. .
The 'Level' eld indicates the current level in the container in
accordance with the reading on the control board and cannot
be edited.
The 'Dosage' eld is used to indicate the quantity dispensed
in ml/min.
The 'Threshold' eld is for indicating how low the product
level is allowed to get before the system advises you by
e-mail that the container will soon be empty.
The 'Size' eld is for indicating the size of product container.
The product buttons enable their dosing pumps for one
minute to allow readings to be taken. The readings are then
indicated in the 'Dosage' eld.
Press to save the changes.
23
To Next Page
Loading...