ITech IT6000C Series User Manual

Power Supply Function
Value Unit
The CV priority is set to V, and the CC priority is set to
A.
Offset Unit
Offset value unit, CV priority is set to V, CC priority is
set to A.
Time Unit
Time unit, fixed to S.
Mode
Indicates the power supply working mode. The CV
priority is set to CV, and the CC priority is set to CC.
Repeat Repeat times, the setting range is 1~65535.
End State
Indicates the end state. Last (voltage or current main-
tained at the last point after completion) or Normal
(return to the mode before CDWELL execution after
completion).
Total Point
The total number of waveform points.
Keep Time
Indicates the pulse width of each point. Range:
0~3600. Unit: seconds.
Value
Voltage or current value at each point.
– List: User-defined waveform
The fields included in the .csv template file are explained as follows:
Model
Device model, keep the default settings without
modification.
Firmware
Version
Firmware version number, keep the default settings
without modification.
Serial Number
Device serial number, keep the default settings with-
out modification.
File Type
File type, keep the default settings without
modification.
Waveform Type
Waveform type, keep the default settings without
modification.
Vaule Unit The CV priority is set to V, and the CC priority is set to
A.
Slope Unit Slope unit, fixed to S.
Time Unit Time unit, fixed to S.
Copyright © Itech Electronic Co., Ltd.
77

ITech IT6000C Series Specifications

General

Brand	ITech
Model	IT6000C Series
Category	Power Supply
Language	English