ITech IT8625 User Manual

Quick Start
Copyright © ITECH Electronic Co., Ltd. 16
Key
Symbol
Name & Function
Scope
Oscilloscope key used for enabling the oscilloscope function.
Harmonic
Harmonic key used for enabling the harmonic function and
starting harmonic measurement.
Save
Save the current load values.
Recall
Recall the saved load parameters.
Menu
Enter the System Menu and set the configuration parameters of
various functions.
Lock
The key to lock the keyboard, press the key again to unlock.
2.4 Introduction to Information on the Interface
IT8600 electronic load can simulate both the AC load and DC load. Below is the
basic interface information, with the basic metering interface in the AC load
mode as an example.
Basic metering interface
Press “Meter”, and the following initial interface of basic metering will appear.
2.5 Introduction to Interface Symbols
The interface of IT8600 electronic load will display the following symbols. All the
symbols and description are listed in the table below.
Symbol
Description
Symbol
Description
SHORT
Enable the short-circuit
function.
LOG
Record log.
RMT
Remote function.
CF-PRIO
CF Priority.
Status bar
Display area of
measuring data
Soft key
Setting value
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

ITech IT8625 Specifications

General

Brand	ITech
Model	IT8625
Category	Test Equipment
Language	English