ITOH DENKI CBV30 - General Precautions

CBV30UserManual
7
Safety precautions
Advance preparation
Check ProductInstallation/Wiring
Maintenance/Inspection
Specifications Control/Operation
3-1.
General precautions
Generalprecautions
3. Safety precautions
Do not use in a way exceeding the range of the product specifications.
Failure to follow this could result in malfunction, fire, and/or injury.
WARNING
Do not use the product near places subject to explosive,
flammable gas, and/or corrosive atmosphere, and/or
combustible materials.
Failure to follow this could result in explosion, fire, electric shock and/or injury.
When using the product in places where serious accidents
and/or damage may possibly occur, install backup and/or
fail-safe functions systematically.
Failure to follow this could result in the inability to control this product due to
driver card malfunction, which could lead to serious accidents.
CAUTION
Do not forcibly bend and/or pull cables.
Also, do not put heavy materials on cables, or do not get them
stuck between cables.
Failure to follow this could result in fire and/or electric shock due to cable damage.
Failure to follow this could result in serious accidents. We assume no
responsibility for remodeled products.
Never remodel the driver card.
Make sure to attach ground wires to the conveyor body and DC
power supply unit.
Failure to follow this could result in electric shock if any malfunction or leakage occurs.
Do not apply strong impact and/or excessive force to the product,
such as hitting it with objects, or dropping it. Also, do not use the
equipment if strong impact has been applied, and/or if the
appearance has become deformed.
Failure to follow this could result in malfunction due to applied impact.
Turn off the power supply to the product before moving, installing,
maintenance and/or inspection (excluding those during operation).
Working while the power is on could result in accidents due to unexpected operation.
Observe the safety regulations for installation locations, and/or
products in use.
Securely wire each connector to the connection parts.
Improper wiring could result in electric shock and/or malfunction.