International Thermal Research 2-1
Mounting – Oasis
SCH33 Heating System
2.1 Before You Begin
Plan the location of the Oasis
®
SCH33™ Heating System and all its
major components in advance to ensure the chosen locations are
compatible with installation requirements and within the technical
specifications.
Consider the following factors to help you decide exactly where
best to mount the Oasis SCH33 Heating System:
• Heater weight when full
• Ventilation requirements
• Exhaust outlet location and maximum acceptable length,
including all 90-degree bends. Refer to section 3.2.
• Potential for vibration and jarring
• Fuel storage location
• Most efficient plumbing runs
• Safe and convenient access for maintenance
• Number and location of interior fans
• Location of other equipment to be installed or connected to
Oasis SCH33 including: control box, heat exchangers, overflow
tank, batteries, etc.
Make sure you are familiar with Section 1, Overview of this
manual. If the system is not installed according to specifications
and with the correct equipment, your heater may not operate
properly, safety may be compromised, and your warranty may be
voided.
To Next Page