EasyManua.ls Logo

ITR OASIS SCH33 - What NOT to Do

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 7, Plumbing the System
International Thermal Research 7-5
7.3 What NOT to DO
The Oasis SCH33 Heating System’s coolant distribution pump is one
of the most critical parts of the system. Never let the pump run dry
or damage will occur to the rotor. This is not covered under
warranty.
Don’t use low-quality heater hose for the space heating loop.
Don’t let the space heating loop hose come into contact with
solvents, which may cause it to soften and swell. If there is any risk
that solvents may contact the hose, insert it into PVC plastic tubing
for protection.
Don’t let the hoses come in contact with any hot exhaust parts.
Figure 7-4: Approved Methods for Installing Heater Hose
(consult ITR for alternative methods and products)
NOTICE

Table of Contents