• If the read result is higher than the number programmed in step 1, the module is counting
correctly.
• If the read result is not higher than the number programmed in step 1, replace the 100G remote
ERT module.
Itron programs and software variables
This section defines and clarifies possible system variables you may encounter in
programming 500G ERT modules.
Field Deployment Manager (FDM)
The following tables illustrate various FDM programming configurations and the endpoint
response to each setting.
100G Series Remote Module Programming
100G Series Gas ERT Module Installation Guide, Remote Mount TDC-0824-017 14
Proprietary and Confidential