ES Prohlášení o shodě
D2036027_AD_EU_Declaration_RR16_en-cz.docx
gas pressure regulators for natural gas and all non-corrosive gases
with or without safety shut-off valves for OPSO and UPSO
Manufacturer: Itron GmbH, Hardeckstraße 2, D-76185 Karlsruhe
declares under his sole responsibility, that the regulator
RR16…
is in conformity with the Gas Appliance Regulation EU/2016/426
and the Pressure Equipment Directive EU/2016/426
The regulator with or without safety shut-off valve has been classified as safety
accessory in category IV, by the manufacturer. The used fluids are classified in
group 1 according to article 13 2014/68/EU.
Applied conformity assessment
procedures PED: Module B + D
Applied harmonized standards: DIN EN 334:2019 and DIN EN 14382:2019
Other applied EU-Directives: 2014/30/EU, electromagnetic tolerance
- EN 61000-6-2 (2019); EN61000-6-3 (2006 + A1:2010)
only for optional electronic device
Engaged notified body:
Module D, Surveillance of the QS-System: TÜV SÜD Industrie Service GmbH, Westendstraße 199, D-80686 München
Module B, EU type examination certificate: DVGW CERT GmbH, Josef-Wirmer Straße 1-3, D-53123 Bonn
Examination/inspections/tests
during manufacturing: TÜV SÜD Industrie Service GmbH, Westendstraße 199, D-80686 München
Surveillance of the QS-System: DGR-0036-QS-955-20
EU type examination certificate no: CE-0085 AQ1103
Regulators according to EN 334 - if not equipped, with any electronic device – do not have a potential ignition source and
therefore are not in the scope of European directive 2014/34/EU.
Karlsruhe, 10. března 2020
M. Einhaus
Ředitel vývoje produktů