Diagraph - an ITW Company PA/4600 & PA/6000 User Manual
User Interface Page 33
User Interface
Use this menu to map the desired input event to the input port number.
The selection choices are identical for each of the inputs 1 through 4
(Input 1 shown at left). Multiple inputs can be assigned to a single
event, thus logically ‘ANDing’ the inputs, with isolation from each other.
The below table outlines the events and meaning of each input event:
Screen Functionality
Input Event Description
• None
Noinputeventassigned
• Online
Enteronlinemode.Levelactivated.Cannotenteronlinemodeif
thereisanerror.Deactivatesignalforofflinemode
• Product
Detector1
Trigger product detector 1 signal. This can start the print cycle
(if print activation is set for Prod Sens 1), and start the apply
cycle.Pulseactivated.
• Product
Detector2
Trigger product detector 2 signal. This can start the print cycle
(ifprintactivationissetforProdSens2).Pulseactivated.
• Error
Thisinputallowsanexternaldevicetohaltoperation,resulting
inanerror.Puls eactivated.
To Next Page
Loading...