3
Views of the Furnace, List of Parts 5
1. Introduction / Signs and Symbols 6
1.1 Preface
1.2 Introduction
1.3. Notes regarding the Operating Instructions
2. Safety First 7
2.1 Indications
2.2 Health and safety instructions
3. Product Description 11
3.1 Components
3.2 Hazardous areas and safety equipment
3.3 Functional description
3.4. Accessories
4. Installation and Initial Start-Up 12
4.1 Unpacking and checking the contents
4.2 Selecting the location
4.3 Assembly
4.4 Initial start-up
5. Menu Operation and Standard Settings 14
5.1 Introduction to the operation
5.2 Parameter selection in the display
5.3 Operating the menu/key functions
5.4 Adjusting the intensity of the background illumination
5.5 Selecting °C or °F mode
5.6 Selecting the buzzer signal
5.7 Description of the firing curve display
6. Practical Use / Program Description 16
6.1 Switching on/off
6.2 Firing with standard programs
6.3 Firing with individual programs
6.4 Programming, changing programs
6.5 Controlling the CTE
6.6 Additional practical information
7. Maintenance, Cleaning and Diagnosis 20
7.1 Monitoring and maintenance
7.2 Cleaning
7.3 Furnace calibration ('Silver Test')
8. What if ... 22
8.1 Error messages
8.2 Technical malfunctions
8.3 Repair
9. Product Specifications 25
9.1 Delivery form
9.2 Technical data
9.3 Acceptable operating conditions
9.4 Acceptable transportation and storage conditions
10. Firing Tables / Program Tables in °C and °F 26
Table of Contents
To Next Page
Loading...
