6
1. Introduction / Signs and Symbols
1.1 Preface
Dear Customer
Thank you for having purchased
the Programat P200. It is a
highly technical quality product.
The Programat P200 has preset
standard programs. The relevant
firing data are shown on an
illuminated LC-display.
The furnace has been designed
according to EN 61010-1 and
thus complies with the relevant
EU regulations.
The furnace has been designed
according to the latest industry
standards. Inappropriate use
may damage the equipment and
be harmful to personnel. Please
observe the relevant safety
instructions in Chapter 2.
You must read
these Operating
Instructions
1.2 Introduction
The Programat P200 is a
high-tech product for dental lab
technology. It is equipped with
state-of-the-art electronic
components.
These Operating Instructions are
divided into several chapters to
help you find specific topics
quickly and easily.
Signs and symbols
The signs and symbols in these
Operating Instructions and on
the furnace facilitate the finding
of important points and have
the following meanings:
Operating Instructions:
Risks and dangers
This symbol marks
safety instructions
that must be
followed to prevent
injury or death.
Furthermore, damage
to the furnace and/or
laboratory may thus
be avoided.
Important
Information
This symbol marks
additional information
for correct and
economic use of the
P200 furnace.
Contraindication
Burn hazard
Furnace:
Alternating current
On
Off
Burn hazard
Risk of crushing
Warning from a
hazardous area
– Note: observe
documentation
– Objects may only
be placed into the
firing chamber by
means of tongs
Grounding sign
1.3 Notes regarding the
Operating Instructions
Furnace concerned:
Programat P200
Target group:
Dental technologists
These Operating Instructions
facilitate the correct, safe, and
economic use of the Programat
P200 furnace.
The Operating Instructions are
divided into several, clearly
structured chapters. This should
enable you to locate specific
topics quickly and easily.
The vacuum pump (accessory
to the furnace system) is not
described in these Instructions.
Please refer to the corresponding
vacuum pump Operating
Instructions.
To inform you about risks/
dangers, important information,
and contraindications, these
Instructions contain
corresponding signs/symbols to
mark important paragraphs.
We recommend keeping the
Instructions in a safe place near
the furnace to have immediate
access to the information if
necessary.
Should you lose the Operating
Instructions, extra copies can be
ordered at a nominal fee from
your local Ivoclar Vivadent
Service Centre.
To Next Page
Loading...
