29
5. Operation and Configuration
4. The write-protection was successfully deactivated.
The lock symbol is no longer shown in the display next to the
[Options] button.
2. Press the [Deactivate write-protection] button.
3. Press the [Close] button to leave the Options menu.
Changing program options
Pressing the [Options] button opens the menu for advanced program options:
Example 1: Deactivating the write-protection
1. Press the [Options] button.
2. Enter the desired holding temperature and confirm with
the green button.
The holding temperature has been successfully changed. All other
parameters shown in the firing curve can be changed / edited in the
same way.
To Next Page
Loading...
