To Next Page

To Previous Page

For Your Safe Flight Page 39

how to interpret the data. Select delimited; delimiters: comma; text

qualifier: " (quote).

"EZSave 3-13-2001"

"Aircraft Number N1205X_"

"Flight #5 11/12/98 11:46:24"

"Eng Deg F OAT Deg F F/F GPH"

"Duration 4.44 Hours "

"TIME","E1","E2","E3","E4","E5","E6","C1","C2","C3","C4","C5","C6","DIF","CLD",

"OAT","BAT","FF","USD","MARK"

"11:46:24",1375,1323,1386,1342,1437,1323,355,365,340,368,329,353,114,0,

75,13.9,12.8,21,"S"

"11:46:30",1376,1323,1387,1343,1438,1324,354,365,342,369,330,353,115,0,

75,13.9,12.8,21,""

"11:46:36",1375,1322,1385,1342,1436,1325,356,365,343,367,332,353,114,0,

75,13.9,12.8,21,""

"11:46:42",1376,1320,1385,1340,1437,1324,355,365,345,368,331,353,113,0,

75,13.9,12.8,22,""

The line

"TIME","E1","E2","E3","E4","E5","E6","C1","C2","C3","C4","C5","C6","DIF","CLD",

"OAT","BAT","FF","USD","MARK"

is the header text and is listed in the file only once. It describes the

contents of each subsequent line of data starting with time in

hours:minutes:seconds. The next labels are E1…E6 for EGTs, then

C1…C6 for CHTs. The DIF, CLD, OAT, BAT, FF and USD are the

same as on the EDM-700 display. The MARK field will be an “S” if the

data was marked by pressing the LF button twice.

Import the data to your Excel or Lotus 123 spreadsheet and follow the

directions for your spreadsheet for analyzing and plotting data.

Section 8 - Personalizing

Pilot Programming

To start the Pilot Programming Procedure, simultaneously hold the

STEP and LF buttons for five seconds. You will see the word PROGRAM

for two seconds and then the sequence shown in the chart below. Tap the

STEP button to advance to the next item in the list. Tap the LF button to

select alternate values of that item. The shaded areas in the chart below

pertain only to the Fuel Flow Option.

J.P. Instruments EDM-800 User Manual

Questions and Answers: