For Your Safe Flight Page | 53
Programming Trip Mode
Trip Mode keeps a running total of fuel used (USD) for all flights. If Trip
Mode = No, fuel ‘USD’ is zeroed after updating the EDM’s fuel computer
via Refuel modes. NOTE: to clear the fuel used display at any time, tap
STEP until you see USD. Hold both DIM and ALL/EGT/FF buttons until
the display shows ‘.0 USD’.
1. Enter the pilot program mode by simultaneously holding the STEP
and LF buttons for five seconds.
2. Tap NEXT repeatedly until you see TRIP Used? No.
3. Tap YES to select the trip mode or NO to deselect mode.
4. Tap NEXT to accept your choice.
To Next Page
Loading...
