J-Tech Digital JTECH-4K88-EX2 - Video Switching Operation; Video Switch; Video Control; The Specific Operation Is as Follows

6
Operating Instruction
4.2 Video switching operation
4.2.1 Video switch
The signal switch includes 8 free switching channels, which can be configured as input/output
according to the requirements, forming a matrix of 1 x 8 ~ 8 x 1, which can switch any input.
Signal to 1 channel output or all channel output.
The specific operation is as follows:
Video switching mode (P1)
Switch the input to the output
Operation format: "output channel" + "input channel"
For Example: Output port 2,5,8 switch to input 7
Operation: Press OUT number "2" "5" "8" + IN number "7" to complete the switch
4.2.2 Video Control
The video interface have two sub menu
1. Video Switch
2. Video On/Off
The specific operation is as follows:
1.Video Switch
9]OZINGT_U[ZV[ZZUUTKOTV[ZUXGRRU[ZV[ZYZUZNKYGSKOTV[Z
ʒ9KRKIZȔ<OJKUȕOTZNKSKT[GTJVXKYYȔ+4:+8ȕ
ʓ:NKT[YKȔ;6ȕȕ*5=4ȕH[ZZUTZUYKRKIZȔ9]OZINOTMȕ
ʔ6XKYYȔ+4:+8ȕKTZKXTK^ZVGMK
ʕ6XKYYȔ;6ȕȕ*5=4ȕH[ZZUTZUYKRKIZZNKU[ZV[Z:NKTOTZNVUXZSKGTY'22
ʖ6XKYYȔ+4:+8ȕ
ʗ6XKYYȔ;6ȕȕ*5=4ȕZUYKRKIZZNKOTV[Z
ʘ6XKYYȔ+4:+8ȕ9]OZIN*UTK

