Jackson 10 Series - Ordering Replacement Conduit, Fittings, and Hose

07610-002-41-09-F
43
CONDUIT AND FITTINGS/HOSE AND TUBING
PARTS
Jackson dishmachines come with a wide variety of conduit and fi ttings for use in routing the wires of the machine. The list
below provides for most of stock of such items. When ordering, remember that Jackson does not offer pre-cut sections
of conduit for your machine, instead it is sold by the foot. Please take into account the slack that will be necessary once
installing the new conduit to ensure that it fi ts correctly. It is recommended that you order at least 6” more conduit than you
require to ensure that you have enough for trimming. Tubing and hose are ordered by the foot. Jackson reserves the right
to require minimum ordering quantities for the items below.
Conduit, 1/2”, Liquidtite 05975-101-25-00
Conduit, 1/2”, Non-Metallic 05975-111-46-57
Conduit, 1/2”, PVC 05975-105-04-00
Conduit, 1/2”, Sealtite 05975-105-01-00
Conduit, 1/2”, Xtrafl ex 05975-105-06-44
Conduit, 3/8”, Liquidtite 05975-105-02-00
Conduit, 3/4”, Cole-Flex 05975-105-05-00
Conduit, 3/4”, Liquidtite 05975-105-03-00
Conduit, 3/4”, Non-Metallic 05975-011-47-71
Conduit, 3/4” Xtrafl ex 05975-105-07-44
Conduit, 1”, Carlon 05975-011-68-42
Elbow, Cole-Flex, 1/2”, 90° 05975-205-40-00
Elbow, Xtrafl ex, 1/2”, 90° 05975-205-44-44
Elbow, Xtrafl ex, 3/4”, 90° 05975-205-45-44
Fitting, 1/2” Straight 05975-011-45-13
Fitting, 1/2”, Straight, Zinc Plated 05975-111-89-89
Fitting, 1/2”, 45° 05975-011-45-23
Fitting, 1/2”, 45°, Zinc Plated 05975-111-89-86
Fitting, 1/2”, 90° 05975-011-45-14
Fitting, 1/2”, 90°, Zinc Plated 05975-111-89-88
Fitting, 3/4”, Straight 05975-011-47-72
Fitting, 3/4”, 45° 05975-011-47-74
Fitting, 3/4”, 90° 05975-011-47-73
Fitting, 1”, Straight 05975-011-70-75
Fitting, 1”, 90° 05975-011-68-43
Fitting, Cole-Flex, 1/2” Straight 05975-205-03-00
Fitting, Cole-Flex, 3/4” Straight 05975-205-41-00
Fitting, Cole-Flex, 3/4”, 90° 05975-204-42-00
Fitting, Liquidtite, .231 ID/.394 OD 05975-011-49-03
Fitting, Liquidtite, .25 ID/.546 OD 05975-011-65-51
Fitting, Liquidtite, .27 ID/.48 OD 05975-011-59-50
Fitting, Liquidtite, 1/2”, 90° 05975-111-01-00
Fitting, Liquidtite, 3/8”, Straight 05975-205-03-82
Fitting, Liquidtite, 3/8”, 90° 05975-205-02-82
Fitting, Liquidtite, 3/4”, Straight 05975-205-15-02
Fitting, Liquidtite, 3/4”, 45° 05975-205-01-82
Fitting, Liquidtite, 3/4”, 90° 05975-205-07-82
Fitting, Xtrafl ex, 1/2”, Straight 05975-205-47-44
Fitting, Xtrafl ex, 3/4”, Straight 05975-205-46-44
Nut, 1-1/4” 05975-011-42-54
CONDUIT:
CONDUIT
FITTINGS: