4 4234520 First Edition
FOREWORD
How to Use This Manual
This manual is designed to provide multiple ways to
locate and access repair information.
Read each section in entirety before beginning a
procedure. Proper understanding of machine operation
and components is the key to successful diagnostics and
repair.
Make use of special information features with in this
manual in order to be better prepared to perform repairs.
Always follow manual procedures and safety guidelines.
Never take shortcuts.
Table of Contents
Major machine components or topics of interest are
separated into specific chapters. Each manual lists these
chapters in a main Table of Contents.
Chapter Table of Contents
Each chapter begins with a detailed Table of Contents
related to the specific machine component or system.
Use the Chapter Table of Contents to find specific
component or procedural information.
Index
An alphabetical Index is located at the back of the
manual.
Use the Index to find specific components and related
procedures.
Required Tools and Materials
Some procedures will require the use of specific tools
and/or materials. These tools and/or materials will be
listed for reference, prior to beginning a procedure.
Specifications
Near the beginning of each chapter is a specifications
listing. This listing contains any specifications contained
within the chapter.
Quick Reference Specifications
A list of all machine specifications can be found in
Chapter 2 Specifications and General Information. This is
a list of all specifications from each chapter, combined
and listed in one place for easy reference.
Warnings and Cautions
Warning and Caution indicators are located throughout
the manual at specific points of interest. These notices
are given to prevent personal injury, death and/or
equipment damage. Always heed these notices, and
practice common sense when performing any
maintenance or repair procedure.
Notes
Special notes are given in order to draw attention to
detailed instructions. These notes are intended to give
further important information regarding the machine
and/or a step in a procedure.
Troubleshooting
Troubleshooting charts are provided in each chapter to
aid in the diagnostic process. Use these suggestions to
aid in identifying a potential mechanical or machine
adjustment problem.
Copyright 2010, Jacobsen, a Textron Company
“All rights reserved, including the right to reproduce this material or portions thereof in any form.”
To Next Page
Loading...
Need help?
General
