Red Light & Chromotherapy Replacement
What You will Need:
• Phillip's Head Screw Driver
Caution: *Unplug the sauna before handling any wiring or electrical components*
Step 1: Remove the top cover from the roof by unscrewing each of the screws around the
perimeter of the roof.
Step 2: Disconnect the main Molex connected to the
Red Light or Chromotherapy light bar. Unscrew any
cable clamps attached to the light bar’s wiring to
release the wiring harness.
Step 3: Unscrew the yellow
straps to release and remove
the light bar.
Step 4: Carefully insert the new light bar and reinstall the yellow straps. Reconnect the Molex
connector and reinstall any cable clamps. Reinstall the roof cover (make sure you do not
overtighten the screws).
To Next Page
Loading...
