Keypad Replacement
What You will Need:
• Phillip's Head Screwdriver
• Flathead Screwdriver or Pry Tool
Caution: *Unplug the sauna before handling any wiring or electrical components*
Step 1: To remove the keypad, first remove the trim ring around the keypad - this can be easily
removed using a thin flathead screwdriver or pry tool (be careful not to damage the ring or the
surrounding wood).
Step 2: Once the trim ring has been removed, unscrew the four screws to remove the keypad.
Step 3: Carefully disconnect the keypad data cable
from the keypad.
Step 4: Plug the data cable into the new keypad, then
screw it back onto the wall (be careful not to
overtighten the screws). Replace the trim ring by
pressing it back in place.
Once this has been completed, restore power to the
sauna and test the keypad.
To Next Page
Loading...
