Jacuzzi Platinum 2001 - Motor Operation and Blower Issues

Troubleshooting
Problem
8. Motor stops.
9. Air blower does not operate.
Probable Cause
A. Motor overload condition.
B. Inadequate supply wiring.
A. Power OFF.
B. Switch is OFF.
C. House breaker tripped, no
power to system.
D. GFCI tripped.
E. Faulty motor.
Remedy
A. Let cool for one hour. Motor
overload will reset; if problem
persists, see *NOTE.
B. Consult a qualified
electrician to correct wiring to
unit.
A. Turn power ON at the
service panel.
B. Press blower button.
C. Reset circuit breaker.
D. Reset GFCI.
E. *
*NOTE:The skills and tools necessary for the safe repair of this hot tub require the services of
qualified personnel. Contact your Jacuzzi Premium Spas dealer or service organization.
Page 42