ADpcmcia adapter
ADwin
28 ADwin Installation, manual version 2.1, December 2005
Checking the settings in ADbasic
Open ADbasic (in the Windows start menu: Programs ADwin ADbasic)
and check first the settings in the dialog window "Options\Compiler".
Set the options in the window: "Compiler Options" from top to bottom
Device No. (all systems)
– Processor: The processor
type of the ADwin system
used.
– Memory: This option is only
available for ADwin boards,
ADwin-light boards or
ADwin-Pro systems with a
processor T4…T8.
Set the memory size of your
ADwin system.
– Device No. (former:
linkaddress): Check the
base setting of this option to
be identical with the base
address set in the PC (see
text box on page 29). The
number is the base address in
hexadecimal notation.
Device No. "None" The setting "None" in the pull-down list for the "Device No." is only
necessary to compile ADbasic programs for test purposes, when no AD-
win system is connected.
– Set the options "Load Standardprocesses", "Autostart" and
"Remember Device No." later, when programming with ADbasic.
Confirm with "OK" and return to ADbasic. The driver installation is now finished
and the main settings in ADbasic are made.
To Next Page
Loading...